Catalog
Catalog

Leveling platform with rotating lip, DLHH series

The DLHH series electro-hydraulic rotating lip platform is a standard device for equipment of loading docks. When activated, the platform rises and the ramp rotates to open. The platform then lowers until it reaches the floor of the car body. Upon completion of work, the platform returns to its original position.
Application:
  • Warehouse facilities
Advantages
This platform is a typical transfer dock solution for different buildings.
The hydraulic safety system stops the platform when a hose breaks or the machine leaves during operation.
When working with a vehicle with a skewed body, it is possible to tilt the platform to the side up to 100 mm.
Side curtain airbags prevent personnel feet from getting into the gap between the platform and the pit during operation.
Availability of "winter packs" for use in areas with extremely low temperatures.
Shot blasting of the metal before powder coating.
This platform is a typical transfer dock solution for different buildings.
The hydraulic safety system stops the platform when a hose breaks or the machine leaves during operation.
When working with a vehicle with a skewed body, it is possible to tilt the platform to the side up to 100 mm.
Side curtain airbags prevent personnel feet from getting into the gap between the platform and the pit during operation.
Availability of "winter packs" for use in areas with extremely low temperatures.
Shot blasting of the metal before powder coating.
Design
Surface Type
Colour Options
Diamond plate
Diamond plate
RAL 9005 Jet black
RAL 9005 Jet black
RAL 5005 Signal blue
RAL 5005 Signal blue
Equipment
Standard
Optional
Dock leveler

Dock leveler

Connecting cable for control unit

Connecting cable for control unit

Side sealing between deck and frame

Side sealing between deck and frame

DCUH-1 control unit. Standard. 380V 3 phase power supply. Operates a dock leveler via a constant-pressure push-button. Returs the dock leveler to stored position via a constant-pressure push-button. Blocks the dock leveler when the door is closed.

DCUH-1 control unit. Standard. 380V 3 phase power supply. Operates a dock leveler via a constant-pressure push-button. Returs the dock leveler to stored position via a constant-pressure push-button. Blocks the dock leveler when the door is closed.

DCUH-2 control unit. With advanced functions. 380V 3 phase power supply. Operates the dock leveler via a constant-pressure push-button. Returns the dock leveler to stored position via one pressure of AUTO button. Blocks the dock leveler when the door is closed. Can be connected to indoor and outdoor traffic lights. Lights at platform area. Maintenance service indicator. Digital display.

DCUH-2 control unit. With advanced functions. 380V 3 phase power supply. Operates the dock leveler via a constant-pressure push-button. Returns the dock leveler to stored position via one pressure of AUTO button. Blocks the dock leveler when the door is closed. Can be connected to indoor and outdoor traffic lights. Lights at platform area. Maintenance service indicator. Digital display.

DCUH-3 control unit. Complex control panel which operates various combinations of loading dock equipment. 380V 3 phase power supply. Operates the dock leveler via a constant-pressure push-button. Returns the dock leveler to stored position via one pressure of AUTO button. Blocks the dock leveler when the door is closed. Can be connected to indoor and outdoor traffic lights. Lights at platform area. Maintenance service indicator. Digital display. Controls overhead door operator. Controls inflatable dock shelter.

DCUH-3 control unit. Complex control panel which operates various combinations of loading dock equipment. 380V 3 phase power supply. Operates the dock leveler via a constant-pressure push-button. Returns the dock leveler to stored position via one pressure of AUTO button. Blocks the dock leveler when the door is closed. Can be connected to indoor and outdoor traffic lights. Lights at platform area. Maintenance service indicator. Digital display. Controls overhead door operator. Controls inflatable dock shelter.

Photo electric sensor. Interlocks the dock leveler and sectional doors. The sensor blocks the dock leveler control when the door is closed to prevent its damage.

Photo electric sensor. Interlocks the dock leveler and sectional doors. The sensor blocks the dock leveler control when the door is closed to prevent its damage.

Wheel guides. They are used to direct reversing vehicles safely and quickly on to the loading docks thus preventing damages to dock shelters or the building. The guides are designed to minimise possible contact with the truck wheel rim. They are made of steel tubes with 159 mm diameter and positioned in front of the loading bay. These wheel guides are fixed to the surface with anchor bolts or embedded into a concrete foundation.

Wheel guides. They are used to direct reversing vehicles safely and quickly on to the loading docks thus preventing damages to dock shelters or the building. The guides are designed to minimise possible contact with the truck wheel rim. They are made of steel tubes with 159 mm diameter and positioned in front of the loading bay. These wheel guides are fixed to the surface with anchor bolts or embedded into a concrete foundation.

Safety fences. Fences are placed inside the premise to protect the walls from collisions with forklifts, ensuring correct and safe movement of the vehicle inside the premises and near the loading dock. Fences are made of steel tubes of 100–159 mm diameter, may have any design and be manufactured in accordance with customer’s orders.

Safety fences. Fences are placed inside the premise to protect the walls from collisions with forklifts, ensuring correct and safe movement of the vehicle inside the premises and near the loading dock. Fences are made of steel tubes of 100–159 mm diameter, may have any design and be manufactured in accordance with customer’s orders.

Shock columns. Designed to prevent forklifts from damaging vertical angles of sectional doors used in loading docks. Shock columns are installed inside the premise in front of the door vertical angle. Available in any diameter from 100 to 159 mm.

Shock columns. Designed to prevent forklifts from damaging vertical angles of sectional doors used in loading docks. Shock columns are installed inside the premise in front of the door vertical angle. Available in any diameter from 100 to 159 mm.

Traffic lights Traffic-light-LED. Help manage safe traffic of trucks and forklifts during departures/entries and loading operations. Can be connected to control units of DCUH-2, DCUH-3 series.

Traffic lights Traffic-light-LED. Help manage safe traffic of trucks and forklifts during departures/entries and loading operations. Can be connected to control units of DCUH-2, DCUH-3 series.

Molded rubber bumpers 250 × 250 × 100 mm. Standard. Product number BR250×250×100. Ensure safe truck movement reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 250 × 250 × 100 mm. Standard. Product number BR250×250×100. Ensure safe truck movement reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 450 × 250 × 100 mm. Standard. Product number BR450×250×100. Ensure safe truck movement reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 450 × 250 × 100 mm. Standard. Product number BR450×250×100. Ensure safe truck movement reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 510 × 250 × 330 mm (external dimensions), console type. Based on rubber bumper 450 × 250 × 100 mm. Product number BRC510×250×330. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 510 × 250 × 330 mm (external dimensions), console type. Based on rubber bumper 450 × 250 × 100 mm. Product number BRC510×250×330. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 600 × 364 × 110 mm (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM600×364×110.  Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Have greater service life. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 600 × 364 × 110 mm (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM600×364×110. Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Have greater service life. For mounting dimensions, please, refer to drawings.

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465 × 250 × 165. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. For mounting dimensions, please, refer to drawings.

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465 × 250 × 165. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. For mounting dimensions, please, refer to drawings.

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate and parking sensor. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165S. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate and parking sensor. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/off loading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. This dock bumper is used together with parking radar. For mounting dimensions, please, refer to drawings.

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate and parking sensor. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165S. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate and parking sensor. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/off loading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. This dock bumper is used together with parking radar. For mounting dimensions, please, refer to drawings.

LED dock light is used to illuminate the loading dock.

LED dock light is used to illuminate the loading dock.

Technical description
Size Table
Construction
Standard Construction
Specifications
Operating Conditions
Parameters
Value
Length of dock leveler with load capacity of 6 000 kg (60 kN)*, mm
2 500; 3 000; 3 500; 4 000; 4 500
Length of dock leveler with load capacity of 10 000 kg (100 kN)*, mm
2 500; 3 000
Dock leveler width, mm
1 800; 2 000; 2 200
Operating range depending on leveler length, mm
| Leveler length | Above | Below | 7°
| 2 500 | 655 | 310 | 260
| 3 000 | 710 | 305 | 320
| 3 500 | 775 | 300 | 380
| 4 000 | 835 | 295 | 440
| 4 500 | 895 | 290 | 500
  1. Lip
  2. Toeguard
  3. Lip cylinder
  4. Dock strut
  5. Lifting pump
  6. Hydraulic pump
  7. Deck
  8. Signal black and yellow stripes
  9. Frame
  10. Control unit

Standard lip 400 mm. 35 mm bevel. Whole rectangular lip for trucks with one-size load bed.

Standard lip 400 mm. 35 mm bevel. Whole rectangular lip for trucks with one-size load bed.

Lip 500 mm. 35 mm bevel. Elongated whole rectangular lip for trucks with one-size load bed. Applied when standard length lip is not enough.

Lip 500 mm. 35 mm bevel. Elongated whole rectangular lip for trucks with one-size load bed. Applied when standard length lip is not enough.

Lip 500 mm. 35 mm bevel. Elongated whole rectangular lip for trucks with one-size load bed. Applied when standard length lip is not enough.

Lip 500 mm. 35 mm bevel. Elongated whole rectangular lip for trucks with one-size load bed. Applied when standard length lip is not enough.

Segmented lip. 35 mm bevel. Has three segments. Folding of one or two side segments allows using the leveler with trucks whose load bed is narrower than the standard one.  Applicable only with 6 000 kg capacity levelers.

Segmented lip. 35 mm bevel. Has three segments. Folding of one or two side segments allows using the leveler with trucks whose load bed is narrower than the standard one. Applicable only with 6 000 kg capacity levelers.

Lip without bend. 35 mm bevel. Whole, without segments. Rectangular lip ideal for trucks with one-size load bed and loaders with low or very low clearance.

Lip without bend. 35 mm bevel. Whole, without segments. Rectangular lip ideal for trucks with one-size load bed and loaders with low or very low clearance.

Parameter Value Notes
Length, mm 2 500; 3 000; 3 500; 4 000; 4 500
Weight, kg 820; 960; 1 100; 1 250; 1 400
Load capacity, kg (kN) 6 000 (60); 10 000 (100)
Maximum point load, Н/mm² 1,3 6 mm top sheet
Maximum point load, Н/mm² 6,5 8 mm top sheet
Power, W 750 hydraulic pump electric drive
Supply voltage, V 380, 3 phase
Supply voltage, V 24
IP protection class IP54
Preparation of steel surface before application of paints, class Sa 2
Thickness of paint layer, not less than, mkm 60
Operating temperature range, °С from -30 to +50
Number of lifting cylinders, pcs. 1 2 (optional)
Hydraulic fluid Mobil DTE10 EXCEL

Conduct routine inspections and maintenance of the dock leveler to ensure its safe and smooth operation.

Keep people and goods clear of working area while operating the dock leveler.

Keep overhead door fully open while operating the dock leveler.

Make sure the vehicle is properly parked against the dock bumpers. Chock the wheels if needed.

Do not drive on the leveler unless the lip is securely positioned on the truck bed and has a minimum of 100 mm overlap on its surface.

Ensure that the control unit location allows operator to clearly see and control dock leveler operation.

Use dock levelers with 1,3 Н/mm² point load only with standard forklifts having inflatable wheels.

Use dock levelers with 6,5 Н/mm² point load with loading machinery having high point load, including electric stackers, pallet carriers, reach trucks, order picking stackers on polyurethane wheels.

Additional Information print

Lifting equipment: forklift truck (minimum load capacity — 35 kN, fork length — not less than 2 000 mm); crane (minimum load capacity — 20 kN).

Mounting equipment: welding machine (5–200 A); 3 mm welding electrodes.

Installation
Mounting Options
Checking Dimensional Details
Embedded mounting
Embedded mounting
Suspended mounting
Suspended mounting
  1. Pits for dock levelers are prepared in accordance with DoorHan drawings and correspond to dock leveler’s type and mounting.
Documentation
Technical Data and Certificates

Certificate of Conformity #151299198

Certificate of Conformity #151299199

Certificate of Conformity #151299200

Warranty print

DoorHan warrants the dock leveler with hinged lip to operate properly for a period of 2 years from purchase date for retail and dealer orders.

New Products
Control unit was equipped with a plug to provide mains connection (optional).

Control unit was equipped with a plug to provide mains connection (optional).

Design
Surface Type
Diamond plate
Diamond plate
Colour Options
RAL 9005 Jet black
RAL 9005 Jet black
RAL 5005 Signal blue
RAL 5005 Signal blue
Equipment
Standard
Dock leveler

Dock leveler

Connecting cable for control unit

Connecting cable for control unit

Side sealing between deck and frame

Side sealing between deck and frame

Optional
DCUH-1 control unit. Standard. 380V 3 phase power supply. Operates a dock leveler via a constant-pressure push-button. Returs the dock leveler to stored position via a constant-pressure push-button. Blocks the dock leveler when the door is closed.

DCUH-1 control unit. Standard. 380V 3 phase power supply. Operates a dock leveler via a constant-pressure push-button. Returs the dock leveler to stored position via a constant-pressure push-button. Blocks the dock leveler when the door is closed.

DCUH-2 control unit. With advanced functions. 380V 3 phase power supply. Operates the dock leveler via a constant-pressure push-button. Returns the dock leveler to stored position via one pressure of AUTO button. Blocks the dock leveler when the door is closed. Can be connected to indoor and outdoor traffic lights. Lights at platform area. Maintenance service indicator. Digital display.

DCUH-2 control unit. With advanced functions. 380V 3 phase power supply. Operates the dock leveler via a constant-pressure push-button. Returns the dock leveler to stored position via one pressure of AUTO button. Blocks the dock leveler when the door is closed. Can be connected to indoor and outdoor traffic lights. Lights at platform area. Maintenance service indicator. Digital display.

DCUH-3 control unit. Complex control panel which operates various combinations of loading dock equipment. 380V 3 phase power supply. Operates the dock leveler via a constant-pressure push-button. Returns the dock leveler to stored position via one pressure of AUTO button. Blocks the dock leveler when the door is closed. Can be connected to indoor and outdoor traffic lights. Lights at platform area. Maintenance service indicator. Digital display. Controls overhead door operator. Controls inflatable dock shelter.

DCUH-3 control unit. Complex control panel which operates various combinations of loading dock equipment. 380V 3 phase power supply. Operates the dock leveler via a constant-pressure push-button. Returns the dock leveler to stored position via one pressure of AUTO button. Blocks the dock leveler when the door is closed. Can be connected to indoor and outdoor traffic lights. Lights at platform area. Maintenance service indicator. Digital display. Controls overhead door operator. Controls inflatable dock shelter.

Photo electric sensor. Interlocks the dock leveler and sectional doors. The sensor blocks the dock leveler control when the door is closed to prevent its damage.

Photo electric sensor. Interlocks the dock leveler and sectional doors. The sensor blocks the dock leveler control when the door is closed to prevent its damage.

Wheel guides. They are used to direct reversing vehicles safely and quickly on to the loading docks thus preventing damages to dock shelters or the building. The guides are designed to minimise possible contact with the truck wheel rim. They are made of steel tubes with 159 mm diameter and positioned in front of the loading bay. These wheel guides are fixed to the surface with anchor bolts or embedded into a concrete foundation.

Wheel guides. They are used to direct reversing vehicles safely and quickly on to the loading docks thus preventing damages to dock shelters or the building. The guides are designed to minimise possible contact with the truck wheel rim. They are made of steel tubes with 159 mm diameter and positioned in front of the loading bay. These wheel guides are fixed to the surface with anchor bolts or embedded into a concrete foundation.

Safety fences. Fences are placed inside the premise to protect the walls from collisions with forklifts, ensuring correct and safe movement of the vehicle inside the premises and near the loading dock. Fences are made of steel tubes of 100–159 mm diameter, may have any design and be manufactured in accordance with customer’s orders.

Safety fences. Fences are placed inside the premise to protect the walls from collisions with forklifts, ensuring correct and safe movement of the vehicle inside the premises and near the loading dock. Fences are made of steel tubes of 100–159 mm diameter, may have any design and be manufactured in accordance with customer’s orders.

Shock columns. Designed to prevent forklifts from damaging vertical angles of sectional doors used in loading docks. Shock columns are installed inside the premise in front of the door vertical angle. Available in any diameter from 100 to 159 mm.

Shock columns. Designed to prevent forklifts from damaging vertical angles of sectional doors used in loading docks. Shock columns are installed inside the premise in front of the door vertical angle. Available in any diameter from 100 to 159 mm.

Traffic lights Traffic-light-LED. Help manage safe traffic of trucks and forklifts during departures/entries and loading operations. Can be connected to control units of DCUH-2, DCUH-3 series.

Traffic lights Traffic-light-LED. Help manage safe traffic of trucks and forklifts during departures/entries and loading operations. Can be connected to control units of DCUH-2, DCUH-3 series.

Molded rubber bumpers 250 × 250 × 100 mm. Standard. Product number BR250×250×100. Ensure safe truck movement reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 250 × 250 × 100 mm. Standard. Product number BR250×250×100. Ensure safe truck movement reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 450 × 250 × 100 mm. Standard. Product number BR450×250×100. Ensure safe truck movement reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 450 × 250 × 100 mm. Standard. Product number BR450×250×100. Ensure safe truck movement reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 510 × 250 × 330 mm (external dimensions), console type. Based on rubber bumper 450 × 250 × 100 mm. Product number BRC510×250×330. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 510 × 250 × 330 mm (external dimensions), console type. Based on rubber bumper 450 × 250 × 100 mm. Product number BRC510×250×330. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 600 × 364 × 110 mm (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM600×364×110.  Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Have greater service life. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 600 × 364 × 110 mm (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM600×364×110. Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Have greater service life. For mounting dimensions, please, refer to drawings.

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465 × 250 × 165. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. For mounting dimensions, please, refer to drawings.

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465 × 250 × 165. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. For mounting dimensions, please, refer to drawings.

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate and parking sensor. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165S. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate and parking sensor. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/off loading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. This dock bumper is used together with parking radar. For mounting dimensions, please, refer to drawings.

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate and parking sensor. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165S. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate and parking sensor. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/off loading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. This dock bumper is used together with parking radar. For mounting dimensions, please, refer to drawings.

LED dock light is used to illuminate the loading dock.

LED dock light is used to illuminate the loading dock.

Technical description
Size Table
Parameters
Value
Length of dock leveler with load capacity of 6 000 kg (60 kN)*, mm
2 500; 3 000; 3 500; 4 000; 4 500
Length of dock leveler with load capacity of 10 000 kg (100 kN)*, mm
2 500; 3 000
Dock leveler width, mm
1 800; 2 000; 2 200
Operating range depending on leveler length, mm
| Leveler length | Above | Below | 7°
| 2 500 | 655 | 310 | 260
| 3 000 | 710 | 305 | 320
| 3 500 | 775 | 300 | 380
| 4 000 | 835 | 295 | 440
| 4 500 | 895 | 290 | 500
Construction
  1. Lip
  2. Toeguard
  3. Lip cylinder
  4. Dock strut
  5. Lifting pump
  6. Hydraulic pump
  7. Deck
  8. Signal black and yellow stripes
  9. Frame
  10. Control unit
Standard Construction

Standard lip 400 mm. 35 mm bevel. Whole rectangular lip for trucks with one-size load bed.

Standard lip 400 mm. 35 mm bevel. Whole rectangular lip for trucks with one-size load bed.

Lip 500 mm. 35 mm bevel. Elongated whole rectangular lip for trucks with one-size load bed. Applied when standard length lip is not enough.

Lip 500 mm. 35 mm bevel. Elongated whole rectangular lip for trucks with one-size load bed. Applied when standard length lip is not enough.

Lip 500 mm. 35 mm bevel. Elongated whole rectangular lip for trucks with one-size load bed. Applied when standard length lip is not enough.

Lip 500 mm. 35 mm bevel. Elongated whole rectangular lip for trucks with one-size load bed. Applied when standard length lip is not enough.

Segmented lip. 35 mm bevel. Has three segments. Folding of one or two side segments allows using the leveler with trucks whose load bed is narrower than the standard one.  Applicable only with 6 000 kg capacity levelers.

Segmented lip. 35 mm bevel. Has three segments. Folding of one or two side segments allows using the leveler with trucks whose load bed is narrower than the standard one. Applicable only with 6 000 kg capacity levelers.

Lip without bend. 35 mm bevel. Whole, without segments. Rectangular lip ideal for trucks with one-size load bed and loaders with low or very low clearance.

Lip without bend. 35 mm bevel. Whole, without segments. Rectangular lip ideal for trucks with one-size load bed and loaders with low or very low clearance.

Specifications
Parameter Value Notes
Length, mm 2 500; 3 000; 3 500; 4 000; 4 500
Weight, kg 820; 960; 1 100; 1 250; 1 400
Load capacity, kg (kN) 6 000 (60); 10 000 (100)
Maximum point load, Н/mm² 1,3 6 mm top sheet
Maximum point load, Н/mm² 6,5 8 mm top sheet
Power, W 750 hydraulic pump electric drive
Supply voltage, V 380, 3 phase
Supply voltage, V 24
IP protection class IP54
Preparation of steel surface before application of paints, class Sa 2
Thickness of paint layer, not less than, mkm 60
Operating temperature range, °С from -30 to +50
Number of lifting cylinders, pcs. 1 2 (optional)
Hydraulic fluid Mobil DTE10 EXCEL
Operating Conditions

Conduct routine inspections and maintenance of the dock leveler to ensure its safe and smooth operation.

Keep people and goods clear of working area while operating the dock leveler.

Keep overhead door fully open while operating the dock leveler.

Make sure the vehicle is properly parked against the dock bumpers. Chock the wheels if needed.

Do not drive on the leveler unless the lip is securely positioned on the truck bed and has a minimum of 100 mm overlap on its surface.

Ensure that the control unit location allows operator to clearly see and control dock leveler operation.

Use dock levelers with 1,3 Н/mm² point load only with standard forklifts having inflatable wheels.

Use dock levelers with 6,5 Н/mm² point load with loading machinery having high point load, including electric stackers, pallet carriers, reach trucks, order picking stackers on polyurethane wheels.

Additional Information

Lifting equipment: forklift truck (minimum load capacity — 35 kN, fork length — not less than 2 000 mm); crane (minimum load capacity — 20 kN).

Mounting equipment: welding machine (5–200 A); 3 mm welding electrodes.

Installation
Mounting Options
Embedded mounting
Embedded mounting
Suspended mounting
Suspended mounting
Checking Dimensional Details
  1. Pits for dock levelers are prepared in accordance with DoorHan drawings and correspond to dock leveler’s type and mounting.
Warranty

DoorHan warrants the dock leveler with hinged lip to operate properly for a period of 2 years from purchase date for retail and dealer orders.

Documentation
Technical Data and Certificates

Certificate of Conformity #151299198

Certificate of Conformity #151299199

Certificate of Conformity #151299200

Checkout
Managers of the company will answer all
questions by phone: